Manufacturing · Houston, TX

Manufacturing Funding in Houston, TX

Texas's freeport exemption removes property tax on goods brought into or made in Texas and shipped out of state within 175 days, where the local taxing units allow it. For a Houston manufacturer or distributor shipping through the port, it lowers the cost of holding inventory, and with it the line of credit needed to carry stock.

Check business eligibility

Funding specialists, not a lender. No approval guarantee.

Updated October 30, 2026

Decision guide

Houston manufacturers shipping out of state: the freeport exemption

A good fit when

  • An inventory line sized to stock held under 175 days.
  • Equipment financing for production machinery.
  • An SBA 504 loan for a plant or warehouse.
  • Export working capital through an SBA lender.

Look elsewhere when

  • Assuming every taxing unit grants the exemption.
  • Stock that stays in Texas longer than 175 days.
  • A daily-debit advance for inventory.
  • Terms longer than the equipment will last.
Hypothetical: a $250,000 production line over 84 months at 10% APR (USD)
ItemFigure
Monthly paymentAbout $4,150

Illustrative only, not an offer.

Goods in transit

A related goods-in-transit exemption can apply to goods stored and then shipped elsewhere in or out of Texas within 175 days.

Texas rules on advances

HB 700 requires providers of sales-based financing under $1 million to give disclosures and register with the OCCC; banks are exempt.

Official sources (checked October 20, 2026): Texas Comptroller: freeport and goods-in-transit exemptions, Texas HB 700 (2025), enrolled text.

What a funding specialist adds. Nowbiz sizes inventory and equipment financing with tax treatment in mind and compares offers on total cost. The lender sets eligibility and terms.

Prepare

Documents that settle the decision

  • Freeport exemption application and records
  • Inventory aging
  • Shipping records showing out-of-state delivery
  • Three years of business tax returns
  • Customer contracts or backlog
$25K–$1MPublished range
$50,000 – $2,000,000Typical request
Provider-dependent; confirm availability of fundsEquipment financing timing
Soft pullInitial inquiry

Houston, TX

What Houston means for manufacturing financing.

Houston is the largest city in Texas and the energy capital of the country, a sprawling, unzoned metropolis where the Ship Channel, the Texas Medical Center, the Johnson Space Center and one of the most diverse populations in the United States support small businesses in every corridor from Katy to Baytown.

Rents are moderate for a city of this size outside the Galleria and downtown because land is plentiful and unzoned, and the Texas minimum wage tracks the federal rate with no local floors, but windstorm and flood insurance is a large and rising fixed cost for any premises. What that means for a manufacturing business: industrial space with power, ceiling height and loading is scarce and expensive in most metros, and skilled machinists and technicians command wages well above the local floor.

Seasonality matters too. Hot, humid summers and mild winters keep outdoor trades working year-round, while hurricane season from June to November and the rodeo in late winter set the sharpest swings in demand. a manufacturer’s season follows its customers’ order cycles more than the weather, so financing should be timed to purchase orders and delivery schedules rather than the calendar.

Demand for a manufacturing business in Houston traces back to its anchor employers and institutions: The Texas Medical Center with MD Anderson, Houston Methodist and Memorial Hermann, the Port of Houston and the refineries and chemical plants along the Ship Channel, the energy headquarters downtown and in the Energy Corridor, NASA’s Johnson Space Center, Rice University and the University of Houston, and the SBA’s Houston District Office. they are potential customers, suppliers and competitors for labor, and the presence of large industrial, medical or aerospace buyers shapes which contracts a small manufacturer can win.

The commercial map runs through Downtown and Midtown, Montrose’s Westheimer Road, the Heights along 19th Street and Yale, EaDo, the Galleria and Uptown, Chinatown on Bellaire Boulevard, the Mahatma Gandhi District on Hillcroft, Washington Avenue, Harrisburg Boulevard in the East End, and the industrial belt from Pasadena to Baytown. The industrial districts and business parks along these corridors are where production space, suppliers and logistics capacity concentrate.

Customers here are medical Center employees and patients, energy and port workers, refinery contractors, large immigrant communities from Latin America, Asia and Africa, and a dense residential base spread across hundreds of square miles. For a manufacturer the customers are other businesses, and their purchase-order sizes, payment terms and concentration define the working-capital need.

How Houston compares with nearby Texas markets

Houston is not Texas in miniature, and a manufacturing business weighing a second location or comparing notes with peers should read the neighboring markets on their own terms.

Austin is the Texas state capital and the home of the University of Texas, a technology hub with major campuses for Tesla, Apple, Oracle and Samsung, and a food, live-music and fitness culture that has made it the most expensive and fastest-changing market in the state.

Commercial rents are the highest in Texas and have climbed for more than a decade, and although the state minimum wage tracks the federal rate, the local labor market is priced by technology employers, so both occupancy and payroll are tight. Hot summers and mild winters keep trades working, while South by Southwest in March, the ACL Festival and Formula 1 in the fall, the UT calendar and the biennial legislative session drive the sharpest swings in demand.

Plano is a large, affluent suburb north of Dallas that has become a corporate headquarters city in its own right, with Toyota North America, JPMorgan Chase and Liberty Mutual at Legacy, major hospital campuses, top-rated schools and a dense professional workforce that supports premium services and family-oriented businesses.

Rents at Legacy West and along the Tollway are among the highest in North Texas, and although the Texas minimum wage tracks the federal rate, the local labor market is priced by corporate employers, so service businesses depend on an affluent, loyal clientele. Hot summers, mild winters and winter ice storms shape the year, while corporate schedules, the school calendar, the Balloon Festival in September and the holiday season at Legacy set the tempo for retail, dining and family services.

Set against both, rents are moderate for a city of this size outside the Galleria and downtown because land is plentiful and unzoned, and the Texas minimum wage tracks the federal rate with no local floors, but windstorm and flood insurance is a large and rising fixed cost for any premises.

Nearby Texas markets for a manufacturing business
MarketAnchor employers and institutionsCustomer base
Austin, TXThe Texas Capitol and state agencies, the University of Texas at Austin, Dell Medical School and Ascension Seton, the Tesla Gigafactory in the southeast, Apple and Oracle campuses, Samsung’s fabs to the north, Austin-Bergstrom International Airport, and Circuit of the Americas.Technology and state-government employees, students and faculty, festival and convention visitors, a young professional population, and affluent households across the western hills and northern suburbs.
Plano, TXLegacy West and Legacy Town Center with Toyota North America, JPMorgan Chase and Liberty Mutual, Medical City Plano and Baylor Scott & White Plano, Collin College, the Plano Independent School District, and the corporate campuses along the Dallas North Tollway.Corporate headquarters employees, affluent families, hospital staff, students at Collin College, and business-to-business buyers across the Legacy corridor.
Houston, TX at a glance for a manufacturing business
FactorLocal detail
Anchor employers and institutionsThe Texas Medical Center with MD Anderson, Houston Methodist and Memorial Hermann, the Port of Houston and the refineries and chemical plants along the Ship Channel, the energy headquarters downtown and in the Energy Corridor, NASA’s Johnson Space Center, Rice University and the University of Houston, and the SBA’s Houston District Office.
Commercial corridorsDowntown and Midtown, Montrose’s Westheimer Road, the Heights along 19th Street and Yale, EaDo, the Galleria and Uptown, Chinatown on Bellaire Boulevard, the Mahatma Gandhi District on Hillcroft, Washington Avenue, Harrisburg Boulevard in the East End, and the industrial belt from Pasadena to Baytown.
Customer baseMedical Center employees and patients, energy and port workers, refinery contractors, large immigrant communities from Latin America, Asia and Africa, and a dense residential base spread across hundreds of square miles.
SeasonalityHot, humid summers and mild winters keep outdoor trades working year-round, while hurricane season from June to November and the rodeo in late winter set the sharpest swings in demand.
State disclosure rulesHB 700 (since September 2025): standardized disclosures and registration for sales-based financing such as advances under $1 million; other products not covered
State minimum wage$7.25 an hour (the federal rate, adopted by reference)
SBA district officesHouston: 8701 S. Gessner Dr. Suite #1200, Houston, TX 77074; Dallas / Fort Worth: 150 Westpark Way, Suite 130, Euless, TX 76040; San Antonio: 615 E. Houston St., Suite 298, San Antonio, TX 78205; El Paso: 211 N. Florence St., Suite 201, El Paso, TX 79901; Lower Rio Grande Valley: 2422 E. Tyler Ave., Suite E, Harlingen, TX 78550; West Texas: 1205 Texas Ave., Room 408, Lubbock, TX 79401

Minimum wage, SBA office and disclosure details checked October 15, 2026 against official sources: U.S. Department of Labor: state minimum wage laws (updated July 1, 2026), SBA Dallas / Fort Worth District Office, SBA Houston District Office, SBA San Antonio District Office, SBA El Paso District Office, SBA Lower Rio Grande Valley District Office, SBA West Texas District Office. Local minimum wages can be higher; confirm current rules before relying on them.

  • Texas commercial financing disclosuresTexas regulates commercial sales-based financing such as merchant cash advances (HB 700, in force since September 2025, with standardized disclosures and provider registration); for term loans, lines and factoring, ask every provider for the total repayment, an annualized cost, the term, the payment schedule and prepayment terms in writing.
  • SBA and free counselling in TexasThe SBA serves Texas through six district offices — Dallas/Fort Worth, Houston, San Antonio, El Paso, the West Texas office in Lubbock and the Lower Rio Grande Valley office in Harlingen — each with lender-relations staff, SCORE chapters and Small Business Development Centers hosted by universities and community colleges across the state.
  • Labour cost directionTexas’ statutory minimum wage tracks the federal rate and the state pre-empts local minimum wages, so labor pricing is set by the market rather than by ordinance; in the large metros the going rate for hourly staff sits well above the statutory floor, and the state has no personal income tax but levies a franchise (margin) tax on businesses above a revenue threshold.

Local numbers

Manufacturing businesses in and around Houston, in figures

The Census Bureau counted 4,126 manufacturing plants and workshops with paid employees in Harris County, which includes Houston, in its 2023 County Business Patterns. That is 3.7% of the county's 111,215 employer locations, compared with 3.1% across Texas. 51% had fewer than 10 employees. They employed 154,890 people, with average annual payroll of $84,800 per employee.

In the SBA's 2026 fiscal year (October 2025 through September 2026), 125 lenders approved 769 SBA 7(a) loans totaling $643.5 million for businesses in Harris County, an average of $837,000 per loan. By number of loans, the most active were Newtek Bank, National Association (77 loans); Zions Bancorporation, National Association (59 loans) and Northeast Bank (58 loans). Certified development companies approved 27 SBA 504 loans totaling $46.8 million for real-estate and equipment projects there; the most active was Capital Certified Development Corporation.

How to use these numbers: they describe the local market, not your odds. SBA figures count only loans the SBA guarantees, and a manufacturing business is approved on its own revenue, credit and cash flow. A lender that is already active in the county is a reasonable place to ask about SBA options before comparing faster, costlier products.

Harris County: official figures
MeasureHarris County
Manufacturing plants and workshops with employees (2023)4,126
Share of all employer locations: county vs Texas3.7% vs 3.1%
Share with fewer than 10 employees51%
SBA 7(a) loans approved, FY2026769 ($643.5 million)
Lenders making SBA 7(a) loans here, FY2026125
SBA 504 loans approved, FY202627 ($46.8 million)

Sources: U.S. Census Bureau, County Business Patterns 2023; U.S. Small Business Administration, 7(a) Lender and 504 CDC Activity Reports, FY2026 (data as of September 30, 2026, by project county). County figures include the whole county, not only Houston.

Manufacturing essentials

What matters most for a manufacturing business in Houston.

A manufacturer commits cash months before it collects. A purchase order arrives, raw materials are bought, labor and machine time are spent, the goods ship, and the customer pays thirty to ninety days later. A big order is therefore a cash-flow problem before it is a profit, and a manufacturing business in Houston that wins one needs capital sized to the order, not to last year’s average. Purchase-order financing, invoice factoring and lines of credit are the tools built for this cycle.

The full Manufacturing business loans guide covers the rest in depth: how each product fits, what lenders check, the documents that settle a decision, typical timelines and the mistakes that cost owners money.

  • Lender viewHard assets and B2B receivables open the widest product range.
  • Margins and cash patternCapital-intensive; purchase orders precede cash by months
  • SeasonalityDepends on end market; many see Q1 slowdowns

Products that fit

Three or four structures, not thirty.

Four products account for most manufacturing financing in Houston. The table shows published market guidelines — typical amounts, funding speed, cost ranges and minimums — and the notes below explain why each structure fits a manufacturing business.

Product comparison guidance for a manufacturing business in Houston
ProductTime to fundEligibility reviewAmount to discussPricing structure
Equipment financingProvider-dependent; confirm availability of fundsOperating-history requirements vary by provider; Ask which personal and business credit checks applyProvider-specific; size to repayment capacityLoan interest or lease payments; compare deposit, fees and ownership terms
Invoice factoringProvider-dependent; confirm availability of fundsProvider assesses business and eligible invoices; Customer and owner checks depend on the agreementProvider-specific; size to repayment capacityContracted invoice fee, fee period, reserve and any additional charges

How each structure fits a manufacturing business, with worked comparisons, is covered in the Manufacturing business loans guide.

Worked example

What $285,500 looks like for a manufacturing business.

Numbers make the trade-offs concrete. The estimator below uses the top-fit product at a typical amount for a manufacturing business; the comparison table shows what two alternatives would look like at the same amount using midpoint market rates.

Payment estimator

Estimate a equipment financing payment

Equipment financing at a typical machine cost for a Houston manufacturer across the published APR range; SBA and term-loan structures are compared beneath at the same amount. Illustrative equipment-financing figures for a typical Houston manufacturing business purchase, with SBA and term-loan alternatives compared below at the same amount. A typical machine purchase for a Houston manufacturer priced as equipment financing across the published APR range, with SBA and term-loan structures compared beneath.

$7,328 per month and $439,662 in total payback (18.5% assumed annual interest; 60 months; fees excluded).

Hypothetical figures using the stated term or collection period. Fees are excluded. Revenue-based amounts are averages over an assumed period, not fixed payments.

Equipment financing: $285,500 at hypothetical scenario inputs
ScenarioEstimated paymentTotal payback / customer settlementBasis
Lower scenario input$5,653 / month$339,1957.0% assumed annual interest; 60 months; fees excluded
Midpoint$7,328 / month$439,66218.5% assumed annual interest; 60 months; fees excluded
Higher scenario input$9,237 / month$554,21430.0% assumed annual interest; 60 months; fees excluded
Same $285,500 under three structures (midpoint of published ranges)
StructureEstimated paymentScheduleTotal payback / customer settlementBasis
SBA loan$4,014 per month120 months$481,68011.5% assumed annual interest; 120 months; fees excluded
Business term loan$11,579 per month36 months$416,84926.5% assumed annual interest; 36 months; fees excluded

Estimates use the midpoint of published market ranges and standard term assumptions; they are illustrations, not offers. Actual pricing, term and payment frequency are set by the funding partner after underwriting. Compare offers on total payback and payment fit, and in Texas ask for the same disclosures California and New York require.

Secure eligibility check

Fast Funding Review

Tell us about the manufacturing business, the Houston location and the funding goal. The review is confidential and no-obligation, and the first step uses no hard credit pull.

  • No hard credit pull to apply
  • Review and funding times vary by provider
  • 5+ years in the industry
  • Encrypted, private document handling

Prepare the file

Documents that help explain the request.

A consistent file shortens the review. Provide sensitive documents only through the private application workflow when asked. A Houston manufacturing business should be ready with:

  • Recent business bank statements
  • Current orders and receivables aging
  • Equipment quote or production budget
  • Debt and equipment schedule
  • Profit-and-loss statement and balance sheet
  • Accounts-receivable and payable ageing

Manufacturing questions

Questions Houston manufacturing business owners ask.

How do manufacturers in Houston finance new machinery?

Equipment financing over three to seven years at up to 100% of cost, or an SBA loan over ten years for larger projects. Vendors are typically paid directly and installation can be included.

Can I finance a large purchase order?

Purchase-order financing covers production for confirmed orders; factoring then advances the invoice after shipment.

How much can a manufacturer borrow?

Published ranges run from roughly $50,000 to $2,000,000 across equipment, factoring and SBA products, with SBA 7(a) loans reaching $5,000,000; financial statements and receivable quality decide the figure.

General questions about credit checks, documents and how Now Biz Fund works are answered on the About page.

Now Biz Fund arranges funding, it does not lend. The value is in matching the request to the right structure and partner and in comparing offers on one basis. Ranges on this page are market guidelines; the actual offer depends on underwriting. Questions before applying? Call +1 (929) 744-5992 or start the no-obligation review.

Call nowCheck eligibility